POLITEX FUZI - /bridge waterproofing/
H
igh-bitumen waterproofing membrane based non-woven polyester fabric, soaked and covered on both sides with bitumen modified with APP, masked by the lower side with hot melt polyethylene film with a final coating on the upper side - protective mineral layer or hot melt polyethylene film. The base of stabilized non-woven polyester fabric weighing 250 g / m2 gives high resistance to mechanical deformation and dimensional stability of the product.
- Polyethylene film
- SBS / styrene butadiene styrene / - modified bitumen
- Reinforced base layer non-woven polyester fabric ≥ 250 g/m2
- Colored mineral slate / shale / or polyethylene film
Parameters |
Test Method |
Measure |
POLITEX FUZI |
|||||
4,5 kg/m2 without protection mineral powder |
5 kg/m2 without protection mineral powder |
5,5 kg/m2 without protection mineral powder |
4.5 kg/m2 with protection mineral powder |
5 kg/m2 with protection mineral powder |
5,5 kg/m2 with protection mineral powder |
|||
Type the basis |
- |
- |
Non-woven polyester fabric ≥ 250 gr/m2 |
|||||
Type of bitumen |
- |
- |
Modified: SBS |
|||||
Width |
BDS ЕN 1848-1 |
cm |
100 |
100 |
100 |
100 |
100 |
100 |
Mass per unit of area |
BDS ЕN 1849-1 2004 |
Kg/m2 |
4,5 |
5 |
5,5 |
4,5 |
5 |
5,5 |
Tensile strength at break – longitudinal – cross – diagonal |
BDS ЕN 12311-1: 2003 |
N/5cm |
1010 900 1000 |
1100 1000 1060 |
1200 1000 1100 |
1010 900 1000 |
1100 1000 1060 |
1200 1000 1100 |
Elongation – longitudinal – cross – diagonal |
BDS ЕN 12311-1: 2003 |
% |
45 50 50 |
55 60 60 |
55 60 60 |
45 50 50 |
55 60 60 |
55 60 60 |
Waterproof under pressure 0,7MRa |
BDS ЕN 1928:2004 Method В |
- |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
Flexibility at low temperatures |
BDS EN 1109:2002 |
°C |
Depending on the order the temperature amplitude may be -10, -15, -20 °C without changes |
|||||
Heat resistance |
BDS EN 1110:2005 |
°C |
+ 120 °C no drip |
|||||
Resistance of ripping off the joints – longitudinal – cross |
BDS EN 12317-1: 2002 |
N/5cm |
1030 920 |
1150 1005 |
1200 1050 |
1030 920 |
1150 1005 |
1200 1050 |
Resistance to static punching |
BDS EN 12730: 2006 |
N |
≥ 250 N |
≥ 250 N |
≥ 250 N |
≥ 250 N |
≥ 250 N |
≥ 250 N |
Resistance to tearing of the stem of a nail |
BDS EN 12310-1: 2002 |
N |
300 |
330 |
350 |
300 |
330 |
350 |
Shock resistance (dynamic drilling) |
BDS EN 12691: 2006 Method А |
- |
withstand ≥ 2000 mm |
withstand ≥ 2000 mm |
withstand ≥ 2000 mm |
withstand ≥ 2000 mm |
withstand ≥ 2000 mm |
withstand ≥ 2000 mm |
Water Absorption |
BDS 3521:1984 т. 2.6 |
% |
0,5 |
0,5 |
0,5 |
0,5 |
0,5 |
0,5 |
Adhesion to concrete |
Method I-58 |
MPa |
0,7 |
0,7 |
0,7 |
0,7 |
0,7 |
0,7 |
Content of the bitumen after extraction |
BDS 3521:1984 т. 2.10.1*** |
% |
≥ 60 |
≥ 60 |
≥ 60 |
≥ 60 |
≥ 60 |
≥ 60 |
Penetration at 25 °C |
BDS 10057-83** |
0,1 mm |
≥ 30 |
≥ 30 |
≥ 30 |
≥ 30 |
≥ 30 |
≥ 30 |
Temperature breakage Fraas |
BDS 10103-87** |
°C |
- 15 |
- 15 |
- 15 |
- 15 |
- 15 |
- 15 |